Change the shingles on an older roof (Chenoa, Illinois)
Wiki Article
It might surprise you to know that an old roof can be replaced by itself. While the project will require work and time, as well as some planning, we'll be there to help you.Project Overview
For this project you'll need a hammer with a screwdriver, a prybar, roofing felt paper and roofing cement. A caulk gun, wire brush, a putty knives, and a wire brush. A helper is essential for this project to run smoothly. Now let's get started!
Step 1: Remove any broken shingles.
You can remove damaged shingles using a screwdriver or hammer. The good shingles should be protected around the edges. After the broken shingles have been removed, clean the area with a wire brush.
Step 2: Cut a new shank to the correct size.
Get one of your new shingles and cut it to size with your utility knife. The new shingle should be exactly the same size as your original one.
Step 3: Attach the new shingle.
Now is the best time to replace the roof's shingles. You will need to attach 4 nails at every corner. Make sure you space the nails correctly so they are in the exact same place.
Step 4: Repeat steps 1-3 until all the shingles are replaced.
After you have replaced all of the damaged or missing shingles, it is time to take care of your roof by performing some maintenance tasks. These tasks include checking for loose nails and cleaning out gutters.
Congratulations! These steps allowed you to replace any damaged or missing roof roof contractor Cove3ll Illinois shingles. To ensure that your roof lasts for many years, roof contractor Cooksville Illinois make sure to perform maintenance tasks such as cleaning out gutters (blog) and checking for loose nails.